Autoplace PS-6

Four-Track Concrete Placer-Spreader

The PS-6 model leads the world’s highest capacity paving trains.

All of CMI’s material placing equipment is designed for demanding operations across diverse applications found in the four corners of the world.Variable-width placing and spreading

  • Dual-lane spreading in a single pass
  • Hydrostatic-driven rotary-spreader auger and strike-off moldboard assemblies adjust for crowning


Features

Drive System

Dual-range propelling system with variable hydrostatic drives for both forward and reverse. Paving range variable up to 30 fpm (9 mpm). Trimming range variable up to 60 fpm (18 mpm). Travel range variable up to 60 fpm (18 mpm).

EDC-controlled track drive and auger drive for improved control of hydrostatic functions.

Tracks are driven hydrostatically through deep-reduction planetary hubs. Posi-Trac® 4-track control limits track slippage. Track length 8 ft 4 in (2.54 m), 28-in (7112 mm)-deep section. D-4 undercarriage components with 18-in (457.2-mm) triple-grouser street shoes. 10-in (254-mm) leg barrels with 42-in (10668 mm) vertical stroke.

Mainframe

Deep section, telescoping mainframe is hydraulically adjustable up to 8 ft (2.44 m), providing placing and spreading width ranges from 18 ft to 24 ft (5.49 m to 7.32 m), standard. Optional extensions expand spreading width to 38 ft (11.58 m).

Power Drive System

Five axial piston-type hydrostatic pumps, remotely controlled from console; pressure compensated, variable and reversible. Auxiliary hydraulic pump provides oil to operate all hydraulic cylinders, including elevation and steering. An optional additional pump may be installed for extended widths or special applications.

Hydraulic Oil Filtration

Three-micron absolute-filtration pre-filtered supply system. All other hydraulic circuits filtered return-side, 10 microns, nominal. Auxiliary control system pressure- side filter, 3 microns, absolute.

Water System

Hydraulically driven pump delivers 800 psi (5,512 kPa) water to hose and high-powered nozzle for cleanup and utility use. Onboard water storage capacity is 200 gal (757.07 L).

Grade Control

HYDRA-MATION® all-hydraulic control system is fully proportional. Pressure compensated, variable-displacement pump provides hydraulic oil to the direct-acting servo-valve proportional sensors. Individual flow control at sensors for fine tuning.

Elevation Control

Operator selection for automatic or manual mode. Four elevation control sensors with extendible mounting arms. Calibrated-scale adjusting hardware for sensors. Standard control system arrangement includes equipment for four-point control (dual stringline), lock-to-grade for automatic reference control of elevation.

Steering

Operator selection for automatic or manual mode, forward or reverse. Right-hand or left-hand stringline steering control mounting. Separate operator selection for manual steering in transport mode. Calibrated-scale hardware for adjusting sensor position and fine-tuning alignment. Four steering sensors standard. Remote manual steering switches located on elevation-sensor mounting arms, close to each leg.

Operator's Console

Rubber-booted all-weather switches. Locking levers protect critical function controls.

EDC-controlled hydrostatic auger drive and track drive for improved operator control.

Uni-lever controls for auger and travel.

The following functions are controlled by electrical switches from the console: Ignition, Powered Crown, Throttle, Water System, Sideforms.

Selector switches for manual or automatic control of elevation or steering.

Roll-top lockable anti-vandalism console cover

Subframe

Independent heavy-duty subframe supports spreading components and provides alternate positioning of components. Hydraulic system includes quick couplers and electrical cables equipped with cannon-type plug connectors for disassembly/reassembly.




Options

Caterpillar® diesel engine, 450 hp (336 kW) at 2,100 rpm.
SALT (sealed and lubricated) tracks.
Polyurethane track pads
Extensions for tractor and concrete spreading to 38 ft (11.58 m).
Stringline steer in reverse.


Specifications

operating DIMENSIONS
WIDTH / conveyor extended ft / ins 41’ 8”
mm 12700
WIDTH / conveyor retracted ft / ins 29’ 8”
mm 9040
length ft / ins 42’ 6.5”
mm 12970
HEIGHT MIN/Max ft / ins 9’ 8” - 10’ 4”
mm 2950 - 3150
transport DIMENSIONS
length ft / ins 50’ 5”
mm 15370
WIDTH ft / ins 10’ 2”
mm 3150
weight
propelling unit lbs 75,000
kgs 34,019.4
spreader kit lbs 23,000
kgs 10,432.43
placer system lbs 30,000
kgs 13,607.52
ENGINE
MODEL   Caterpillar Diesel
POWER @ 2,100 rpm hp 425
kW 317
capacity in³ 893
L 14.6
mainframe
spreading width ft / ins 18’ to 24’
mm 5490 to 7320
spreading width w/optional extension ft / ins up to 38’
mm up to 11580
hopper / conveyor
hopper width ft / ins 60”
mm 1524
conveyor transport speed fpm 0 - 465
mpm 0 - 141.73
DRIVE SYSTEMS
paving SPEED RANGE ft/min 0 - 30
m/min 0 - 9
trimming SPEED RANGE ft/min 0 - 60
m/min 0 - 18
TRAVELLING SPEED RANGE ft/min 0 - 60
m/min 0 - 18
SERVICE REFILL CAPACITIES
fuel tank gal 185
L 700
HYDRAULIC oil tank gal 63
L 238.48
replenishing hydraulic reservoir gal 10
L 37.85
engine oil gal 9
L 34.07
engine coolant gal 22
L 83.28
aux water supply gal 200
L 757.07


Find Out More



BROCHURES

Please
login
or
register
to download our brochures
Concrete Paving Brochure




General
info@cmi-roadbuilding.com
1-888-837-3972
Sales
sales@cmi-roadbuilding.com
1-800-994-1736
Parts
parts@cmi-roadbuilding.com
1-800-994-1753
Service
service@cmi-roadbuilding.com
1-800-994-1736
Standard Havens is a registered trademark of CMI Roadbuilding Limited in the United Kingdom, the European Union and Australia.