Autopave SF-1
Curb & Gutter Paver
CMI has lead the way with a revolutionary design for curb and gutter pavers.
The patented design featured on the SF-1 has a profile insert that is easily detached and exchanged when necessary.
In 15 minutes you can switch out profile inserts without having to change the complete mould, including the hopper and vibrators.
Saving time saves money.
The one piece profile inserts are much less expensive than purchasing complete moulds.
Features
- Transport width is < 8' 2" (2500mm) without disassembly
- Low center of gravity, very stable operation
- Numerous configurations for maximum utilization
- Right or left hand operation
- Low machine silhouette for optimum visability
- Operator’s console relocatable
- Curbing 1' 8" (500mm) above grade, 1' 4" (400mm) below grade
- Lift Newjersey barrier mold off wall for end-joint, without disassembly
- Adaptable for 3-D “stringless” control
- Minimum clearance paving : 2' 11" (900mm) stringline side; 8" (200mm) offside
- Machine width 3' 7" (1100mm) > paving width
- Convenient operator’s console (relocatable)
- Modular curb forming system with quick change profile mold
Options
| Modular Side kit curbing system 150 – 900 mm width |
| Concrete conveyor (screw-type) 400 mm wide – 4000 mm long |
| Expandable mould system 0.75 m – 2 m width |
| Special application moulds |
Specifications
| operating DIMENSIONS | ||
| Length | ft / ins | 19’ 8” |
| mm | 6000 | |
| WIDTH | ft / ins | 8’ 2” |
| mm | 2500 | |
| HEIGHT | ft / ins | 9’ 6” |
| mm | 2900 | |
| transport DIMENSIONS | ||
| length | ft / ins | 19’ 8” |
| mm | 6000 | |
| WIDTH | ft / ins | 8’ 2” |
| mm | 2500 | |
| Height | ft / ins | 10’ 2” |
| mm | 3100 | |
| weight | ||
| transport weight | lbs | 29,101 |
| kgs | 13,200 | |
| ENGINE | ||
| MODEL | DEUTZ Air Cooled | |
| POWER @ 2,500 rpm | hp | 133 |
| kW | 99 | |
| capacity | in³ | 246.536 |
| L | 4.04 | |
| tracks & Legs | ||
| track width | ft / ins | 1’ 1.75” |
| mm | 350 | |
| track length | ft / ins | 4’ 7” |
| mm | 1400 | |
| track steering | degrees | 35° LH/RH |
| paving radius | ft / ins | 4’ 11” |
| mm | 1500 | |
| DRIVE SYSTEMS | ||
| operating SPEED RANGE | ft/min | 0 -39 |
| m/min | 0 -12 | |
| TRAVELLING SPEED RANGE | ft/min | 0 - 92 |
| m/min | 0 - 28 | |
| SERVICE REFILL CAPACITIES | ||
| fuel | gal | 35.19 |
| L | 160 | |
| HYDRAULIC | gal | 33 |
| L | 150 | |
| utility water | gal | 101 |
| L | 460 | |
| high pressure washdown | psi | up to 2,495 |
| bar | up to 172 | |
Find Out More
BROCHURES
Only registered and logged in users can download this file.
Concrete Paving Brochure
Only registered and logged in users can download this file.
Concrete Paving Brochure